When laser marking machine at work,the EZCAD software show “Get IPG state error”
Pls kindly first power off whole machine,and re-plug the laser source cable two parts
More info,contact SISMAR LASER
Email:sales@sismarlaser.com
Whatsapp/Wechat:0086 13854105019
Q-Switch fiber laser marking machine parameter side set
Mopa fiber laser marking machine parameter side set
First we will introduce rotary device model.
The Popular model as follows:
1.50mm rotary device,which widely used on jewelry industry
2.80mm rotary device
3.100mm rotary device
Today we will introduce “RotaryTextMark” ,which mainly used on marking text.
SISMAR LASER
More info need,contact by sales@sismarlaser.com
Whatsapp/Wechat:0086 13854105019
Rotary device don’t rotae,in general,it has following reason
1.Parameter set problem
The marking content direction is not suitable used on rotate marking.
The marking content direction should be same with Axis direction
2.Opearation fault.
Text marking use “RotaryTextMark”
Graphic and JPG,BMP format file mark use”RotaryMark”
3.Marking text order wrong
For example,you want to mark 14KD M06-18-18,but marking order is wrong,see photo.
Pls kindly choose Invert,if it has not been chosen,pls kindly choose,or not.
4.How to mark half of ring
Ring diamter*3.14,it is ring circumference,
half of ring,it is Ring Diameter*3.14/2
When it is overlapping,you also can calculate the circumference to check.
5.How to set “go to start postion after finish”.
6.The character space of Marked text is too large,hope it can smaller / The charater space of Marked text is too small,hope it can bigger
Solution 1:Adjust higher the object diameter amount / Adjust smaller the object diameter amount
You may adjust “Part Diameter”, the bigger of number, the smaller of word space on your product.
Solution 2:Adjust text/font space and distance as following parameter
SISMAR LASER
More info need,contact sales@sismarlaser.com
Whatsapp/Wechat:008613854105019