Turn a Photo Into a 3D Crystal — While the Customer Waits
This portable 3D crystal laser engraving machine weighs 25kg and runs from your phone. It engraves inside crystal blocks and crystal balls. No PC, no water cooling. Set it up on a shop counter or at an event booth, and hand over a finished gift before the customer leaves.
One person, one trip. Photographed in our factory in Jinan. Tap to see what it engraves.
Built for a shop counter, not a workshop
Most crystal engraving machines are made for batch production. They sit in one place and run all day. This one goes to where your customers are — a gift shop counter, an event booth.
Someone hands you a photo. You place a crystal blank, upload the file from your phone, and a few minutes later they walk out with their own image engraved inside the crystal. They watch it happen.
A blank costs a few dollars. Finished pieces sell for $20 to $80, depending on size and market. What people pay for is seeing their own photo inside it.
One person can move it
25kg, one trip from the car. No installation — set it on a counter, plug it in, and start.
Air-cooled, no water line
No chiller, no plumbing, nothing to drain before you pack up for the next event.
Blocks and balls
Engrave inside flat-sided crystal blocks with the standard holder, or crystal balls with the optional ball holder.
Photo to finished crystal in four steps
Upload the photo
Send it from your phone over Wi-Fi, or load it straight on the machine's touchscreen. No computer needed.
Place the blank
Drop the crystal into the holder. The position is fixed — nothing to align. A separate ball holder is available for spheres.
The laser engraves inside
The 532nm beam passes through the surface and focuses at points inside the crystal. The outside is never marked.
Hand it over
Two to five minutes, depending on detail. The customer watches it happen and takes it with them.
Blocks and balls, engraved from a customer's photo
What this machine does well, and what it doesn't
Good fit
- Gift shops selling personalized photo gifts to walk-in customers
- Wedding and event suppliers working on-site
- Souvenir shops in tourist areas, museums, and schools
- Mall kiosks and pop-up retail with limited counter space
- Crystal gift resellers handling samples and small orders
Not the best fit
- High-volume batch production — this does one piece at a time
- Crystal larger than the 70×70×70mm engraving volume
- Surface marking or cutting — this engraves inside the material only
- Fully automatic lines where nobody loads the crystal
Specifications and common questions
| Laser type | 532 nm solid-state green laser |
| Engraving type | 3D inner engraving inside crystal |
| Engraving volume | 70 × 70 × 70 mm |
| Positioning accuracy | ±0.01 mm |
| Cooling | Forced air — no water chiller |
| Control | Built-in touchscreen; phone over Wi-Fi |
| Connectivity | Dual-band Wi-Fi + USB |
| File formats | JPG, PNG, BMP, GLB (3D) |
| Devices supported | iOS · Android · Windows · macOS |
| Dimensions | 470 × 240 × 505 mm |
| Weight | ~25 kg |
| Power | 100–240V, 50–60Hz |
| Laser lifespan | 20,000+ hours |
| Materials | K9 crystal, optical glass |
| Crystal shapes | Blocks and cubes (standard holder); balls (optional holder) |
| Warranty | 1 year, whole machine |
No. The 532nm laser passes through the surface without marking it and focuses only at the interior point you specify. The outside stays smooth and clear.
No. The machine has its own touchscreen and a built-in controller. You can also connect a phone over Wi-Fi to upload photos — iOS, Android, Windows and macOS all work, with no drivers to install.
Two to five minutes for a typical piece, depending on photo detail and crystal size. The customer can watch it happen and take it with them.
Yes. Blocks and cubes use the standard holder. Crystal balls need a dedicated ball holder, which is sold as an option — tell us the ball diameter you work with and we'll confirm the fit.
Electricity and the crystal blanks you buy. No ink, abrasives, tubes, or coolant. The solid-state laser is rated past 20,000 hours.
Yes. At 25kg one person carries it. It runs on any 100–240V outlet, uses air cooling so there's no water line, and needs no special ventilation.
K9 crystal and optical glass blanks. It engraves 2D photos, 2.5D relief, and 3D GLB models inside the material. For other materials, send us a sample and we'll test it first.
Sample files to practice on, step-by-step operation videos, and WhatsApp support after delivery.
Bought from overseas, still looked after
A factory behind the machine — not a reseller. Here's what you get.
Send us a photo. We'll engrave it and show you the result.
See your own image inside crystal before you decide anything.