Jewelry & Precious Metal Laser Machines
Whatever you make in gold or silver, there's a Sismar laser for it: cutting, marking, welding and 3D crystal engraving. Every system is sized for small, high-value parts, so edges come out clean and precious-metal waste stays low.
Machines in this category
Jewelers and precious-metal workshops use Sismar lasers to cut, mark, weld and engrave gold, silver, platinum and brass. A fiber laser cutter turns sheet or wire into finished pendants and filigree with smooth, burr-free edges, so there is no second pass of filing or polishing. Fiber markers add logos, serial numbers and hallmarks down to a fraction of a millimeter. Laser welders size rings, rebuild prongs and join fine chains while keeping heat off nearby stones, and our 3D crystal systems engrave photos and portraits permanently inside the glass.
Because the beam is precise and the kerf is narrow, you scrap far less expensive metal than with traditional cutting, which is where most of the cost savings come from. Tell us your material, thickness and part size and we will point you to the right model.
Gold & Silver Cutting
3 machinesFiber and UV cutters for gold, silver and delicate materials like shell and pearl. The narrow kerf and tight precision mean you scrap far less expensive metal on every job.
3000W Fiber Laser Cutting Machine
Cuts up to 3mm pure gold & silver with smooth, burr-free edges.
1500W Fiber Laser Cutting Machine
Desktop cutter for 925 silver & 18K gold, ±0.01mm precision.
UV Laser Cutting — Shell & Pearl
355nm cold cutting, no burn or chipping on shell & pearl.
Marking, Engraving & Mark-+-Cut
3 machinesCompact fiber lasers that mark logos, serial numbers and hallmarks. The Mini and Mini Cover also cut and deep-engrave gold and silver, so one machine covers several jobs.
Mini Fiber Laser Engraving & Cutting
Desktop unit that marks, engraves and lightly cuts metal.
Enclosed Mini Cover Fiber Laser
Fully-enclosed mini fiber for marking & cutting metal.
2.5D Deep Engraving Fiber Laser
Adds depth and relief for logos and hallmarks.
Jewelry Laser Welding
3 machinesSize rings, repair prongs and join fine chains with welders that put heat only where you need it. You can work right next to set stones without the scorching a torch leaves behind.
Pedestal Jewelry Laser Welding
Standing unit for high-volume repair and assembly.
Benchtop Jewelry Laser Welding
Space-saving welder for small workshops.
3D Crystal & Glass Inner Engraving
5 machinesGreen and UV systems that engrave permanent 3D photos and portraits inside crystal, balls and large glass panels. Popular for awards, gifts and personalized pieces.
Portable 3D Crystal Inner Engraver
Turns photos into 3D images inside crystal.
3D Crystal Subsurface Engraver
Permanent subsurface 3D images in crystal.
Spherical 3D Crystal Engraver
Engraves inside crystal balls and spherical media.
Large Format Glass Engraver
Flatbed inner engraving for large glass panels.
Gold, silver & crystal laser samples
Here is what these machines actually produce, from UV-cut seashell jewelry to gold and silver cutting and 3D crystal engraving.
Laser-engraved gold & silver ring
3D crystal inner engraving
UV-cut seashell jewelry
Industrial metal cutting
Photo engraved on metalNot sure which machine you need?
Match your job to the right system below. Each one is built to save expensive metal and cut hours of hand-finishing. Or send us your material and part size and we will recommend a model.
Frequently asked questions
Yes. Our Mini and Mini Cover fiber laser machines both cut and engrave gold and silver in one setup, so you can mark a logo and cut the outline without switching machines.
Yes. Our fiber laser cutters handle gold, silver, platinum and most precious metals. We match the power (1500W to 3000W) to your thickness and output.
No. The focused beam puts heat only at the weld point, so you can work close to set stones without the heat damage a torch causes.
The narrow laser kerf and nesting software keep waste low, so most workshops cut their gold and silver scrap noticeably compared with manual or saw cutting. Exact savings depend on your parts and layout.
Tell us your material and part size
We will recommend the right configuration and send a quote within one business day.